LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine

$189.99

LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine

Out stock

Out of stock

LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine

Non-Touch Pilot Arc Plasma Cutter
Pilot Arc Technology allows you to cut without touching the tip to metal. The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life.

Excellent Performance
20-50 A output, 2/5″ (10mm) ideal clean cuts and 4/7″ (14mm) maximum cut thickness under 220V; 10-35 A output, 1/3″ (8mm) ideal clean cuts and a maximum cut thickness of 2/5″ (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals.

Dual Voltage Input
This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input; 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments.

Cutting Thickness
The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 8mm @ 35A 110V, 60PSI; 10mm@50A 220V 70 PSI.

Safe & Portable
The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device,use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals.

Specifications??/strong>

Brand LITAKE
Model Number CUT50
Color Red
Power Supply Voltag 110V-220V / 50-60Hz
Output Current Range 20A-50A
No-Load Voltage 230±10V
Rated Input Capacity 5.0kVA
Efficiency 93%
Insulation Grade IP21
Quality Cutting Thickness 110V@1/3″(8mm);220V@2/5″(10mm)
Maximum cutting thickness 14mm
Arc Ignition Method HF Arc Starting
Net Weight 13.77 lb / 6.2 kg
Package Dimensions 18.5 x 10.2 x 13.4 inches
Package Contents 1 × Plasma Cutter
1 × Cutting Torch
1 × Earth Clamp with Cable
1 × Air Hose
1 × Teflon Tape
1 × Cleaning Brush
1 × Conversion Plug
1 × 90°Elbow Fittings
2 × Air Hose Ftting
4 × Ceramic Cup
4 × Ceramic Ring
4 × Hose Clamp
4 × Electrode
4 × Nozzle
Weight 9.7 kg
Color

Red

Reviews

There are no reviews yet.

Be the first to review “LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsLITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine removeGARVEE Electric Rebar Bender 1600W 1 Inch Electric Bender Achieve 0-180¡ã Angles Operate Convenient Foot Pedal Switch removeTOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set removeGARVEE 3000W Electric Rebar Bender Cutter Machine 1.3 Inch Electric Bender Achieve 0-180¡ã Angles removeGARVEE Skid Steer Mount Plate Thick Attachment Plate Steel Quick Attachment Loader Plate removeGARVEE 120 Pcs/60 Pairs Quick Splice Wire Terminals T-Tap Self-stripping with Nylon Fully Insulated Male Quick Disconnects Kit remove
NameLITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine removeGARVEE Electric Rebar Bender 1600W 1 Inch Electric Bender Achieve 0-180¡ã Angles Operate Convenient Foot Pedal Switch removeTOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set removeGARVEE 3000W Electric Rebar Bender Cutter Machine 1.3 Inch Electric Bender Achieve 0-180¡ã Angles removeGARVEE Skid Steer Mount Plate Thick Attachment Plate Steel Quick Attachment Loader Plate removeGARVEE 120 Pcs/60 Pairs Quick Splice Wire Terminals T-Tap Self-stripping with Nylon Fully Insulated Male Quick Disconnects Kit remove
Image
SKUPIS_00KRVJTVPHO_0XRWD8PNPHO_0RA14UE2PHO_0XRXIYE7PHO_0XP7IBB8PHO_0S4CYDEK
Rating
Price$189.99$1,999.00$69.99$2,799.00$239.00$38.99
Stock

Out of stock

23 in stock

35 in stock

44 in stock

40 in stock

37 in stock

AvailabilityOut of stock23 in stock35 in stock44 in stock40 in stock37 in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionLITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting MachineGARVEE Electric Rebar Bender 1600W 1 Inch Electric Bender Achieve 0-180¡ã Angles Operate Convenient Foot Pedal SwitchTOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches SetGARVEE 3000W Electric Rebar Bender Cutter Machine 1.3 Inch Electric Bender Achieve 0-180¡ã AnglesGARVEE Skid Steer Mount Plate Thick Attachment Plate Steel Quick Attachment Loader PlateGARVEE 120 Pcs/60 Pairs Quick Splice Wire Terminals T-Tap Self-stripping with Nylon Fully Insulated Male Quick Disconnects Kit
Content
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine

Non-Touch Pilot Arc Plasma Cutter
Pilot Arc Technology allows you to cut without touching the tip to metal. The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life.

Excellent Performance
20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V; 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals.

Dual Voltage Input
This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input; 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments.

Cutting Thickness
The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 8mm @ 35A 110V, 60PSI; 10mm@50A 220V 70 PSI.

Safe & Portable
The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device,use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals.

Specifications??/strong>

Brand LITAKE
Model Number CUT50
Color Red
Power Supply Voltag 110V-220V / 50-60Hz
Output Current Range 20A-50A
No-Load Voltage 230±10V
Rated Input Capacity 5.0kVA
Efficiency 93%
Insulation Grade IP21
Quality Cutting Thickness 110V@1/3"(8mm);220V@2/5"(10mm)
Maximum cutting thickness 14mm
Arc Ignition Method HF Arc Starting
Net Weight 13.77 lb / 6.2 kg
Package Dimensions 18.5 x 10.2 x 13.4 inches
Package Contents 1 × Plasma Cutter
1 × Cutting Torch
1 × Earth Clamp with Cable
1 × Air Hose
1 × Teflon Tape
1 × Cleaning Brush
1 × Conversion Plug
1 × 90°Elbow Fittings
2 × Air Hose Ftting
4 × Ceramic Cup
4 × Ceramic Ring
4 × Hose Clamp
4 × Electrode
4 × Nozzle
Overview: GARVEE Electric Rebar Bender up to 1 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 1600W Motor.Ultra-Fast Bending, Bend rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine
LITAKE Plasma Cutte 50Amp Non-Touch Portable Cutting Machine

Product Features:

Powerful Motor
Equipped with a 1600W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)

Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.

Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.


Specifications£º

Brand GARVEE
Model RB25
Voltage 110-120V
Power 1600W
Frequency 60Hz
Amps 14A
Bending Angle 0-180¡ã
Max. Rebar Diameter 1/4'' / 25 mm #8 Grade 60
Min. Rebar Diameter 1/4'' / 6 mm #2 Grade 60
Bending Speed 6-7 Seconds
Bending Radius 1.57 '' / 40 mm
Max. Rebar Hardness HRC30
Noise 92 dB(A)
Shell Material Iron
Certificate CE
Item Dimensions(L x W x H) 17.72 x 19.69 x 20.08''/45 x 50 x 51 cm
Packing Size(L x W x H) 19.11 x 21.21 x 22.3''/50 x 55 x 56 cm
Gross Weight ?240 pounds
Package Contents 1 x Electric Rebar Bending Machine
2 x pedals
3 x tension springs
4 x carbon brushes
1 x User Manual
Application Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc


Overview: GARVEE Towallmark 20-Piece SAE and Metric Ratcheting Combination Wrench Set,Ratchet Wrenches Set, Cr-V Constructed,Chrome Vanadium Steel Wrench Set with Roll-up Storage Pouch-Fixed Head.Most frequently used sizes, including 10 metric wrenches and 10 SAE wrenches - 6mm, 8mm, 10mm, 12mm,13mm, 14mm, 15mm, 16mm, 17mm, 19mm & 1/4¡å, 5/16¡å, 11/32¡å, 3/8¡å, 7/16¡å, 1/2¡å, 9/16¡å, 5/8¡å, 11/16¡å, 3/4¡å
GARVEE TOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set
GARVEE TOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set

20 Pcs SAE &Metric Ratcheting Wrench Set

Towallmark 20 Piece SAE&Metric Ratcheting Combination Wrench Set is ideal for different nuts and bolts.

?


GARVEE TOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set

Cr-V Constructed

Constructed from Cr-v steel,all of the ratchet wrenches are made of high strength vanadium steel and then chrome finished for long lasting durability. hardened and heat treated

GARVEE TOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set

180 degrees

Box end head pivots 180 degrees to easily get around obstructions. Flexible rotation is convenient for small space operation and effortless operation

GARVEE TOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set

Packager Contents:

20 most frequently used sizes, including 10 metric ratchet wrenches and 10 SAE ratchet wrenches - 6mm, 8mm, 10mm, 12mm,13mm, 14mm, 15mm, 16mm, 17mm, 19mm & 1/4¡å, 5/16¡å, 11/32¡å, 3/8¡å, 7/16¡å, 1/2¡å, 9/16¡å, 5/8¡å, 11/16¡å, 3/4¡å.1*Roll-up Storage Pouch

GARVEE TOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set
GARVEE TOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set
GARVEE TOWALLMARK 20-Piece SAE Metric Ratcheting Combination Wrench Set Ratchet Wrenches Set

Product Features:

72 Teeth Perfect Precision
The 72-teeth, 12 point ratchet gears need only a 5-degree working swing arc suitable for any narrow space.

Premium Material
The ratcheting wrench set is made of premium chrome vanadium steel with mirror polish finish. And heat treated for maximum strength and chrome plated for corrosion and rust resistance

Portable Suspended Canvas Bag
The organizer pouch has each wrench size printed which can help you to protect your ratchet wrenches and keep them all shipshape, and the tailored cover keeps wrenches from sliding out.


Specifications£º

Brand ?Towallmark
Material ?Alloy Steel
Item Dimensions LxWxH ?16.93 x 3.74 x 3.54 inches
Head Style ?Box End
Finish Type ?Polished
Operation Mode ?Mechanical
Manufacturer ?Towallmark
Part Number ?LJL-20210409-FBA-PHO_0RA14UE2-US
Item Weight ?6.89 pounds/3.12kg
Product Dimensions ?16.93 x 3.74 x 3.54 inches
Item model number ?LJL-20210409-FBA-PHO_0RA14UE2-US
Size ?20-Piece Fixed Head SAE/Metric
Finish ?Polished
Measurement System ?Inch, Metric
Package Contents 20 most frequently used sizes, including 10 metric ratchet wrenches and 10 SAE ratchet wrenches - 6mm, 8mm, 10mm, 12mm,13mm, 14mm, 15mm, 16mm, 17mm, 19mm & 1/4¡å, 5/16¡å, 11/32¡å, 3/8¡å, 7/16¡å, 1/2¡å, 9/16¡å, 5/8¡å, 11/16¡å, 3/4¡å.? 1*Roll-up Storage Pouch

?


Overview: GARVEE Electric Rebar Bender up to 1.3 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 3000W Motor.Ultra-Fast Bending: Bend rebar 1/4'' #2 to 1.3" #8 Grade 60(6 to 32 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
GARVEE Electric Rebar Bender Rebar Steel Bender Cutter Machine Bending Rebar Steel Bar Steel Rod
GARVEE Electric Rebar Bender Rebar Steel Bender Cutter Machine Bending Rebar Steel Bar Steel Rod
GARVEE Electric Rebar Bender Rebar Steel Bender Cutter Machine Bending Rebar Steel Bar Steel Rod

Product Features:

Powerful Motor
Equipped with a 3000W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)

Accurate Angle Adjustment
With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.

Sturdy and Durable Build
The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.


Specifications£º

Brand GARVEE
Model RB32
Voltage 110V
Power 3000W
Frequency 60Hz
Amps 26A
Bending Angle 0-180¡ã
Max. Rebar Diameter 1-1/4'' / 32 mm #10 Grade 60
Min. Rebar Diameter 1/4'' / 6 mm #2 Grade 60
Bending Speed 6-7 Seconds
Bending Radius 1.97'' / 50 mm
Max. Rebar Hardness HRC30
Noise 105 dB(A)
Shell Material Iron
Certificate CE
Item Dimensions(L x W x H) 23.62 x 22.83 x 18.5'' / 60 x 58 x 47 cm
Packing Size(L x W x H) 25.59 x 25.59 x 28.74'' / 65 x 65 x 73 cm
Gross Weight ?400 pounds
Package Contents 1 x Electric Rebar Bender
2 x Foot Pedals
3 x Tension Springs
4 x Carbon Brushes
1 x User Manual
Application Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc


Overview: GARVEE Skid Steer Mount Plate Thick Skid Steer Attachment Plate Steel Quick Attachment Loader Plate with 3 Additional Welding Rods Easy to Weld or Bolt to Different Accessories.Great Compatibility, This skid steer mount plate is universally compatible with loaders, tractors and other vehicles with an internal width up to 45", including John Deere, Kubota, Bobcat & Mahindra.
GARVEE Skid Steer Mount Plate Thick Attachment Plate Steel Quick Attachment Loader Plate
GARVEE Skid Steer Mount Plate Thick Attachment Plate Steel Quick Attachment Loader Plate
GARVEE Skid Steer Mount Plate Thick Attachment Plate Steel Quick Attachment Loader Plate

Product Features:

Sturdy Structural Steel
The quick tach mount plate is built with heavy-duty grade 50 structural steel, therefore, it is capable of handling all kinds of loading work. The polished surface resists rust and corrosion, durable for long-lasting use.

Effortless Installation
The skid steer plate attachment can be directly hooked up to your tractor, loader and other machines, and then you can weld it to any attachment like hay spears, plows, forks, etc.

Firmly Welded
Each part of our skid steer attachments has been firmly welded and has passed a series of quality tests, so there is not worry about it breaking apart. It is more stable and more reliable.


Specifications£º

Band GARVEE
Part Number ?ANZHUANGBAN1
Item model number ?X2S3RF
Size ?Adapter
Color ?Black
Item Package Quantity ?1
Batteries Required ?No
Product Dimensions ?3.94 x 18.9 x 46.06 inches
Item Weight ?54 pounds/24.49kg
Package Contents ?1 x Skid Steer Mount Plate


Weight9.7 kg109.3 kg3.128 kg203.8 kg26.2 kg2.155 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 9.7 kg
Color

Red

Weight 109.3 kg
Style

1600W

Color

Orange

Weight 3.128 kg
Color

Silver

Size

20pcs

Weight 203.8 kg
Style

3000W

Color

Orange

Weight 26.2 kg
Size

46 inch

Color

Black

Weight 2.155 kg
Color

AS SHOW

Size

120 Pcs