| Content |
Non-Touch Pilot Arc Plasma Cutter
Pilot Arc Technology allows you to cut without touching the tip to metal. The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life.
Excellent Performance
20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V; 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals.
Dual Voltage Input
This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input; 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments.
Cutting Thickness
The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 8mm @ 35A 110V, 60PSI; 10mm@50A 220V 70 PSI.
Safe & Portable
The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals.
Specifications??/strong>
| Brand |
LITAKE |
| Model Number |
CUT50 |
| Color |
Red |
| Power Supply Voltag |
110V-220V / 50-60Hz |
| Output Current Range |
20A-50A |
| No-Load Voltage |
230±10V |
| Rated Input Capacity |
5.0kVA |
| Efficiency |
93% |
| Insulation Grade |
IP21 |
| Quality Cutting Thickness |
110V@1/3"(8mm);220V@2/5"(10mm) |
| Maximum cutting thickness |
14mm |
| Arc Ignition Method |
HF Arc Starting |
| Net Weight |
13.77 lb / 6.2 kg |
| Package Dimensions |
18.5 x 10.2 x 13.4 inches |
| Package Contents |
1 × Plasma Cutter
1 × Cutting Torch
1 × Earth Clamp with Cable
1 × Air Hose
1 × Teflon Tape
1 × Cleaning Brush
1 × Conversion Plug
1 × 90°Elbow Fittings
2 × Air Hose Ftting
4 × Ceramic Cup
4 × Ceramic Ring
4 × Hose Clamp
4 × Electrode
4 × Nozzle |
|
The 43inch pallet forks is compatible with most loader bucket skid steer tractors. The stabilizer bar can be adjusted from 24.8" to 40.15". The 43 Inch forks for tractor bucket is made of coated welded steel construction, sturdy and durable.
- Security and Durable Materials
It is from coated welded steel construction. The use of T-shaped reinforcement plate makes the pallet fork more firm and reliable and say goodbye to deformation.
- Easy Installation &Versatile
It's simply slide the fork over the cutting edge of the bucket, and clamp it down to lock. It can haul logs, lumber, and firewood, move fence posts, hay bales, clear debris and brush. The versatility of our pallet forks is endless.
Description £º
Size Specification
Load:1500Lbs Max
Total Length: 43"
Fork Length: 30"
Fork Width: 3.7"
Fork Height: 1.97"
Bucket lip gap: 2.48"
Adjustable stabilizer bar: can be adjusted from 18" to 34" W
?
Package List
- 1 x Pallet Forks
- 1 x Adjustable Stabilizer Bar
- 1 x User Manual
Specifications:
|
Brand
|
GARVEE
|
|
Product Name
|
Clamp on Pallet Forks
|
|
Product Model
|
43" 1500lbs Adjustable
|
|
Color
|
Black
|
|
Material
|
Coated welded steel construction
|
|
Capacity
|
1500lbs
|
|
Pallet Forks Size
|
43 inch
|
|
Adjustable Stabilizer Bar
|
YES
|
|
Power Source
|
hand_powered
|
|
Application
|
Loader Bucket Skidsteer Tractor etc.
|
|
Item Weight
|
55.9 pounds/25.36KG
|
|
Product Dimensions
|
45.28 x 12.99 x 4.33 inches
|
|
Package Contents
|
1 x Pallet Forks
1 x Adjustable Stabilizer Bar
1 x User Manual
|
|
Overview: GARVEE 1/4" Thick Plate 3/8" Top Bar Thic Quick Tach Attachment Mount Plate Skid Steer Bobcat.Great Compatibility, This Skid Steer Mount Plate Is Universally Compatible With Loaders, Tractors And Other Vehicles With An Internal Width Up To 45", Including John Deere, Kubota, Bobcat & Mahindra. The Plate Thickness Is 0.24" (6 Mm) .
Product Features:
Sturdy Structural Steel
The quick tach mount plate is built with heavy-duty grade 50 structural steel, therefore, it is capable of handling all kinds of loading work. The polished surface resists rust and corrosion, durable for long-lasting use.
Effortless Installation
The skid steer plate attachment can be directly hooked up to your tractor, loader and other machines, and then you can weld it to any attachment like hay spears, plows, forks, etc.
Firmly Welded
Each part of our skid steer attachments has been firmly welded and has passed a series of quality tests, so there is not worry about it breaking apart. It is more stable and more reliable.
Specifications£º
| Brand |
GARVEE |
| Part Number |
?ANZHUANGBAN3 |
| Item model number |
?X29YNL |
| Size |
?Basic |
| Color |
?Black |
| Item Package Quantity |
?1 |
| Product Dimensions |
?9.25 x 18.5 x 46.46 inches |
| Item Weight |
?57 pounds/25.85kg |
| Included Components |
?1 x Mount Plate |
|
Overview: GARVEE Electric Rebar Bender Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod (1600W Rebar Bender and Cutter).Lightning-Fast Performance: The rebar bending and cutting machine boasts exceptional performance, bending rebar from 1/4'' #2 to 1" #8 Grade 60 (6 to 25 mm) within 6 to 7 seconds and cutting rebar within 5-6 seconds. It can bend at any angle from 0-180¡ã with a bending radius of 1.57'' / 40 mm, and its maximum rebar hardness is HRC30. The hydraulic oil type used is VG46.
Product Features:
Powerful 1600W Copper Coil Motor
Equipped with a 1700W pure copper motor, this rebar cutter and bender runs quietly, has low noise and improves working efficiency, reducing unnecessary wear. The copper motor extends the operating life of the machine. It operates at a voltage of 110V, frequency of 60 Hz, with amps of 14A, and noise level of 92 dB(A).
Angle Adjustment Made Easy
The rebar bending machine has two slide-type angle selectors, making it easy to bend any angle from 0-180 degrees. Preset angle locks ensure accurate, repeatable angle bending. During bending, the angle of point 1 must be greater than point 2 for proper operation.
Durable Construction
This bar bender machine has a sturdy iron machine body and durable Idler Wheel. The ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel are strong and unlikely to break. It can handle super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RBC25 |
| Voltage |
110V |
| Power |
1600W |
| Frequency |
60Hz |
| Amps |
14A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1" / 25 mm #8 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.57'' / 40 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
105 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
19.69 x 17.72 x 31.1'' / 50 x 45 x 79 cm |
| Packing Size(L x W x H) |
22.44 x 18.9 x 38.58'' / 57 x 48 x 98 cm |
| Gross Weight |
?331 pounds |
| Package Contents |
1 x Electric Rebar Bender and Cutter
2 x Foot Pedals
3 x Tension Springs
4 x Carbon Brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
| Towallmark 14-Piece Flex-Head Ratcheting Wrench Set, SAE/Metric Ratchet Wrenches Set,Cr-V Constructed, Chrome Vanadium Steel Combination Ended Standard Kit with Roll-up Storage Pouch.The combination ratchet wrenches set include 8mm, 10mm, 12mm, 13mm, 14mm, 15mm,16mm, 5/16", 3/8", 7/16" 1/2", 9/16", 5/8", 11/16". No-Skip sizing, always have the size you need.
14 Pcs Flex Head Ratcheting Wrench Set
Towallmark Wrench Set Flex-Head Ratcheting Combination Wrench Set 14 Piece SAE&Metric is ideal for different nuts and bolts.
14-piece Flex-Head Ratcheting Combination Wrench Set, Cr-V Constructed
Constructed from Cr-v steel,all of the wrenches are made of high strength vanadium steel and then chrome finished for long lasting durability. hardened and heat treated, with grey Ni-coating for rust resistance.
?
180¡ã Pivoting Head
Box end head pivots 180 degrees to easily get around obstructions. Flexible rotation is convenient for small space operation and effortless operation.
Car Repair
Bicycle Repair
Mechanic Reapir
Product Features:
180¡ãFlex-head Ratchet Head
180 degree flex head helps you to reach the awkward places where most ratchet wrenches would not reach. The 72-teeth ratchet gears need only a 5-degree working swing arc suitable for any narrow space.
Premium Material
The metric wrench set is made of heat-treated Chrome Vanadium Steel and a polished surface which ensures durability and resistance to corrosion.
Roll-up Pouch
This ratcheting wrench set comes with a premium roll-up pouch for easy organization and convenient storage.
Specifications£º
| Brand |
?Towallmark |
| Material |
?Alloy Steel |
| Item Dimensions LxWxH |
?12.99 x 3.74 x 3.54 inches |
| Item Weight |
?4.98 Pounds/2.26kg |
| Head Style |
?Flex |
| Finish Type |
?Chrome Plated |
| Operation Mode |
?Mechanical |
| Manufacturer |
?Towallmark |
| Part Number |
?LJL-20210409-FBA-PHO_0RA0WJNP-US |
| Item Weight |
?4.98 pounds |
| Product Dimensions |
?12.99 x 3.74 x 3.54 inches |
| Item model number |
?LJL-20210409-FBA-PHO_0RA0WJNP-US |
| Size |
?14-Piece Flex-Head SAE/Metric |
| Finish |
?Chrome Plated |
| Measurement System |
?Inch, Metric |
| Package Contents |
The combination ratchet wrenches set include 8mm, 10mm, 12mm, 13mm, 14mm, 15mm,16mm, 5/16", 3/8", 7/16" 1/2", 9/16", 5/8", 11/16". |
?
|
Overview: GARVEE 60" Bucket Clamp on Debris Forks, Heavy Duty Clamp on Pallet Fork 4000 lbs Capacity Bucket Forks Attachments Fit for Loader Bucket Skidsteer Tractor.Bolted Design, Tractor bucket teeth' s inside width is 60", suitable for most loaders. It uses bolted design and plays the role of connection and fixation. Each handle and socket is equipped with a 5/8 "set screw, you can use a 5/16" hexagon wrench to set the screw.
Product Features:
Replaceable Tooth
The bucket tooth bar is equipped with 6 teeth, the clearance is 9.84", which is replaceable and interchangeable. Generally, the broken part of the bucket tooth is a tooth tip, which means that you can replace a broken tooth instead of buying a brand new track.
Protective Coating
The surface of the bucket tooth bar is treated with a metal protective coating, which insulates the metal from the air and keeps other substances from reacting with the metal. It exempts from wearing, rusting, and corrosion, thus extending the service life.
Q345 Steel Alloy
The loader bucket tooth bar adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively penetrate compacted soil and other materials.
Specifications£º
| Band |
GARVEE |
| Part Number |
?CHANDOU |
| Item model number |
?WYVTDC |
| Color |
?Black |
| Item Package Quantity |
?1 |
| Product Dimensions |
?6.69 x 15.35 x 60.63 inches |
| Item Weight |
?90 pounds/40.82kg
|
| Included Components |
?1 x Bucket Clamp on Debris Forks |
|
Reviews
There are no reviews yet.